If you've ever gotten a phone call from an annoyed user whose transaction just won't go through, or from a developer who can't understand why her application sessions are blocking each other, you know how useful it can be to identify not just whose lock is doing the blocking, but what object is locked. Even better, you can identify the exact row that a session is waiting to lock.
To begin, create a situation where one user is actively blocking another. Open two sessions. Issue the following commands in Session 1 to build the test table:
SQL> create table tstlock (foo varchar2(1), bar varchar2(1));
Table created.
SQL> insert into tstlock values (1,'a');
1 row created.
SQL> insert into tstlock values (2, 'b');
1 row created.
SQL> select * from tstlock ;
FOO BAR
--- ---
1 a
2 b
2 rows selected.
SQL> commit ;
Commit complete.
Now grab a lock on the whole table, still in Session 1:
SQL> select * from tstlock for update ;
And in Session 2, try to update a row:
SQL> update tstlock set bar=
2 'a' where bar='a' ;
This statement will hang, blocked by the lock that Session 1 is holding on the entire table.
Oracle provides a view, DBA_BLOCKERS, which lists the SIDs of all blocking sessions. But this view is often, in my experience, a good bit slower than simply querying V$LOCK, and it doesn't offer any information beyond the SIDs of any sessions that are blocking other sessions. The V$LOCK view is faster to query, makes it easy to identify the blocking session, and has a lot more information.
SQL> select * from v$lock ;
ADDR KADDR SID TY ID1 ID2 LMODE REQUEST CTIME BLOCK
-------- -------- ---------- -- ---------- ---------- ---------- ---------- ---------- ----------
AF9E2C4C AF9E2C60 479 TX 131078 16739 0 6 685 0
ADDF7EC8 ADDF7EE0 422 TM 88519 0 3 0 697 0
ADDF7F74 ADDF7F8C 479 TM 88519 0 3 0 685 0
ADEBEA20 ADEBEB3C 422 TX 131078 16739 6 0 697 1
.... .... ... ... .... .... .... .... .... ....
Note the BLOCK column. If a session holds a lock that's blocking another session, BLOCK=1. Further, you can tell which session is being blocked by comparing the values in ID1 and ID2. The blocked session will have the same values in ID1 and ID2 as the blocking session, and, since it is requesting a lock it's unable to get, it will have REQUEST > 0.
In the query above, we can see that SID 422 is blocking SID 479. SID 422 corresponds to Session 1 in our example, and SID 479 is our blocked Session 2.
To avoid having to stare at the table and cross-compare ID1's and ID2's, put this in a query:
SQL> select l1.sid, ' IS BLOCKING ', l2.sid
2 from v$lock l1, v$lock l2
3 where l1.block =1 and l2.request > 0
4 and l1.id1=l2.id1
5 and l1.id2=l2.id2
SQL> /
SID 'ISBLOCKING' SID
---------- ------------- ----------
422 IS BLOCKING 479
1 row selected.
Even better, if we throw a little v$session into the mix, the results are highly readable:
SQL> select s1.username || '@' || s1.machine
2 || ' ( SID=' || s1.sid || ' ) is blocking '
3 || s2.username || '@' || s2.machine || ' ( SID=' || s2.sid || ' ) ' AS blocking_status
4 from v$lock l1, v$session s1, v$lock l2, v$session s2
5 where s1.sid=l1.sid and s2.sid=l2.sid
6 and l1.BLOCK=1 and l2.request > 0
7 and l1.id1 = l2.id1
8 and l2.id2 = l2.id2 ;
BLOCKING_STATUS
----------------------------------------------------------------------------------------------------
BULKLOAD@yttrium ( SID=422 ) is blocking BULKLOAD@yttrium ( SID=479 )
1 row selected.
There's still more information in the v$lock table, but in order to read that information, we need to understand a bit more about lock types and the cryptically-named ID1 and ID2 columns.
In this case, we already know that the blocking lock is an exclusive DML lock, since we're the ones who issued the locking statement. But most of the time, you won't be so lucky. Fortunately, you can read this information from the v$lock table with little effort.
The first place to look is the TYPE column. There are dozens of lock types, but the vast majority are system types. System locks are normally only held for a very brief amount of time, and it's not generally helpful to try to tune your library cache, undo logs, etc. by looking in v$lock! (See the V$LOCK chapter in the Oracle Database Reference for a list of system lock types.)
There are only three types of user locks, TX, TM and UL. UL is a user-defined lock -- a lock defined with the DBMS_LOCK package. The TX lock is a row transaction lock; it's acquired once for every transaction that changes data, no matter how many objects you change in that transaction. The ID1 and ID2 columns point to the rollback segment and transaction table entries for that transaction.
The TM lock is a DML lock. It's acquired once for each object that's being changed. The ID1 column identifies the object being modified.
You can see more information on TM and TX locks just by looking at the lock modes. The LMODE and REQUEST columns both use the same numbering for lock modes, in order of increasing exclusivity: from 0 for no lock, to 6 for exclusive lock. A session must obtain an exclusive TX lock in order to change data; LMODE will be 6. If it can't obtain an exclusive lock because some of the rows it wants to change are locked by another session, then it will request a TX in exclusive mode; LMODE will be 0 since it does not have the lock, and REQUEST will be 6. You can see this interaction in the rows we selected earlier from v$lock:
ADDR KADDR SID TY ID1 ID2 LMODE REQUEST CTIME BLOCK
-------- -------- ---------- -- ---------- ---------- ---------- ---------- ---------- ----------
AF9E2C4C AF9E2C60 479 TX 131078 16739 0 6 685 0
ADEBEA20 ADEBEB3C 422 TX 131078 16739 6 0 697 1
Note that ID1 and ID2 in Session 2, which is requesting the TX lock (LMODE=0, REQUEST=6), point back to the rollback and transaction entries for Session 1. That's what lets us determine the blocking session for Session 2.
You may also see TX locks in mode 4, Shared mode. If a block containing rows to be changed doesn't have any interested transaction list (ITL) entries left, then the session acquires a TX lock in mode 4 while waiting for an ITL entry. If you see contention for TX-4 locks on an object, you probably need to increase INITRANS for the object.
TM locks are generally requested and acquired in modes 3, aka Shared-Row Exclusive, and 6. DDL requires a TM Exclusive lock. (Note that CREATE TABLE doesn't require a TM lock -- it doesn't need to lock any objects, because the object in question doesn't exist yet!) DML requires a Shared-Row Exclusive lock. So, in the rows we selected earlier from v$lock, you can see from the TM locking levels that these are DML locks:
ADDR KADDR SID TY ID1 ID2 LMODE REQUEST CTIME BLOCK
-------- -------- ---------- -- ---------- ---------- ---------- ---------- ---------- ----------
ADDF7EC8 ADDF7EE0 422 TM 88519 0 3 0 697 0
ADDF7F74 ADDF7F8C 479 TM 88519 0 3 0 685 0
Now that we know that each TM row points to a locked object, we can use ID1 to identify the object.
SQL> select object_name from dba_objects where object_id=88519 ;
OBJECT_NAME
--------------
TSTLOCK
Sometimes just knowing the object is enough information; but we can dig even deeper. We can identify not just the object, but the block and even the row in the block that Session 2 is waiting on.
We can get this information from v$session by looking at the v$session entry for the blocked session:
SQL> select row_wait_obj#, row_wait_file#, row_wait_block#, row_wait_row#
2* from v$session where sid=479 ;
ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW#
------------- -------------- --------------- -------------
88519 16 171309 0
This gives us the object ID, the relative file number, the block in the datafile, and the row in the block that the session is waiting on. If that list of data sounds familiar, it's because those are the four components of an extended ROWID. We can build the row's actual extended ROWID from these components using the DBMS_ROWID package. The ROWID_CREATE function takes these arguments and returns the ROWID:
SQL> select do.object_name,
2 row_wait_obj#, row_wait_file#, row_wait_block#, row_wait_row#,
3 dbms_rowid.rowid_create ( 1, ROW_WAIT_OBJ#, ROW_WAIT_FILE#, ROW_WAIT_BLOCK#, ROW_WAIT_ROW# )
4 from v$session s, dba_objects do
5 where sid=543
6 and s.ROW_WAIT_OBJ# = do.OBJECT_ID ;
OBJECT_NAME ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW# DBMS_ROWID.ROWID_C
--------------- ------------- -------------- --------------- ------------- ------------------
TSTLOCK 88519 16 171309 0 AAAVnHAAQAAAp0tAAA
And, of course, this lets us inspect the row directly.
SQL> select * from tstlock where rowid='AAAVnHAAQAAAp0tAAA' ;
FOO BAR
--- ---
1 a
We've seen how to identify a blocking session, and how to inspect the very row that the waiting session is waiting for. And, I hope, learned a bit about v$lock in the process.